Corner Blocks
TT Roof of 25x16m on 8 Towers
|
The Eurotruss corner blocks enables you the creation of 2, 3, 4 way corners matching uniformly with the sleeve blocks of the ground supported towers.
The attachments are bolted to the corner blocks by using female bold on receivers. |
The corner block can be used in all configurations of 90 degree angles which makes it a handy and cost efficient product.
The corner blocks are designed to be very rigid and therefore capable of taking 100% of the applied load in a vertical or horizontal direction. |
The XD Corner Block is an unique multicorner as the upper and down attachment is for FD34 and therefore matching with the standard XD Corners. |
TT Cornberblock + BOB85* |
XT Cornberblock + BOB85* |
ST Cornberblock + BOB85* |
XD Cornberblock + BOB85* |
The Eurotruss corner blocks enables you the creation of 2, 3, 4, 5 and 6-way corners matching uniformly with the standard truss corners.
The attachments are bolted to the corner blocks by using female bold on receivers. |
The corner block can be used in all configurations of 90 degree angles which makes it a handy and cost efficient product.
The corner blocks are designed to be very rigid and therefore capable of taking 100% of the applied load in a vertical or horizontal direction. |
The FD42 and FD32 will only have a 4-way direction although the upper and downside of the cube has a thread hole of M12 which can be used to bolt in a eye-nut and used as hanging point. |
FD44 Cornberblock + BOB100* |
FD42 Cornberblock + BOB100* |
FD34 Cornberblock + BOB105* + FD34-A210* |
FD32 Multicorner + BOB105* |
* = BOB’s come seperately
** = XD Multicorner have a horizontal XD attachment as the upper end down attachment is FD34 |
